Refrigerant gas R-32 pre-calibration module FCM2630-J0A

Introduction to refrigerant Gas R-32 pre-calibration module FCM2630-J0A

1.FCM2630-J0A is an embedded type module using the semiconductor gas sensor which is optimized to detect A2L refrigerant gas R-32.

This module enables users to easily build a reliable gas leakage detection system by eliminating electronic circuit design for temperature compensation and the calibration process. In addition, a connector allows easy replacement of the gas sensor module for periodic maintenance.

The gas sensor has a built-in filter to reduce the influence of alcohol and other interference gases, resulting in high selectivity to R-32. 

FCM2630-J0A is capable of satisfying the IEC60335-2-40 Edition 7.0 Annex LL and the JRA4068:2023 (Performance 3) standards. The applicable standards are both limited to refrigerant gas type: R-32.

2. Refrigerant gas R-32 pre-calibration module FCM2630-J0A

Power supply voltage: 5.0±0.2V DC

Warm-up time: 60 seconds after power ON (If previous operation mode was in Alarm state when power was turned off, the Alarm state will be resumed before completion of the initial stabilization period)

Operating temperature: -25~60℃;

Working humidity: 20~95%RH (avoid condensation;

FCM2630-J0A typical applications

Air conditioning, refrigeration equipment and other refrigerant leakage detection